7 Ways to Fix DHCP is Not Enabled for Wi-Fi

By Dominic Chooper on August 28, 2023

You will not be able to enjoy a seamless connectivity if your Wi-Fi hits a snag and you encounter a DHCP is not enabled for Wi-Fi error.

This can be very irritating especially when you want to access the internet and visit a particular website for some information.

However, it is quite easy to overcome this hurdle and get back to seamless streaming, browsing, downloading, and surfing, if you only know the ways to go ahead.

If you do not know them, fear not, because this article will guide you through the step-by-step solutions to bid adieu to such Wi-Fi woes.


Why is DHCP is Not Enabled for Wi-Fi?

The most significant reason for the DHCP is not enabled for Wi-Fi error to occur is an issue with the network or router settings.

There may also be some hardware issues with the router or its outdated firmware that may disable DHCP.

There are also several other reasons for this error to happen, and some of the most common ones are:

So, as you see, there are several reasons for this error to occur, but the good news is that there are quite a few simple and advanced solutions to this error. You can solve the problem in quick time and with little effort and technical knowledge.

Read Also:  6 Ways Stop Firewall from Blocking Wi-Fi

How to Fix DHCP is Not Enabled for Wi-Fi?

DHCP is Not Enabled for Wi-Fi

One proven way to fix the DHCP is not enabled for Wi-Fi error is to change the setting of the Internet Protocol Version 4 (TCP/IPv4) of the active connections in the Network Connections so that it can obtain the IP address and DNS server addresses automatically.

However, this is a relatively complicated solution to the issue and so are the ones that are mentioned step-by-step in the following section of this article.

In between, there are a few easy and quick checks to make. In a lot of instances, these simple checks resolved this issue. It includes:

A few more complex solutions may also resolve the issue, such as:

Updating the network driver: Press the Windows and X keys together > Select Device Manager > Expand the Network adapters > Right-click on the Wi-Fi adapter > Select Update driver > Select Search automatically for drivers > Restart your system when the process is complete.

Disable and enable network adapter: Go to the search box next to the Start Menu > Type control panel and hit Enter > Go to Network and Internet > Network and Sharing Center > Change adapter settings > Right-click on Wi-Fi > Select Disable > Right-click on Wi-Fi again > Select Enable.

Restart DHCP Client: Type services in search box and hit Enter > Find and right-click on DHCP Client > Click on Restart from the dropdown options.

If none of the above solutions work, you can now move on to the advanced solutions for DHCP is not enabled for Wi-Fi error.

Note: The interface may be different from the demonstration depending on the Windows version, but the basic process is the same. Check yours while following this method.

Also note that all these solutions may not have any direct impact on resolving the issue, and success is not guaranteed for all systems and situations.

It is advised that you seek help from professionals if none of the above or below solutions can restore things back to normal.

With that said, every solution is worth trying before making the call to the professional technician. Let’s dive in.

Method 1: Run the Network Troubleshooter

The easiest and quickest way to fix the DHCP is not enabled for Wi-Fi error is to run the dedicated network and internet troubleshooter.

This built-in Windows tool will not only identify and fix the underlying problems causing the issue but will also recommend changes for the issues that it cannot solve.


Selecting Troubleshoot

Clicking on Other troubleshooters

Clicking the Run button

Now, follow the on-screen instructions to make the changes recommended and end the process.

Making recomended changes

Finally, check whether you are experiencing the error message. If you are, move on to the next solution.

Method 2: Set the DHCP Client Service to Automatic

A network protocol needs the DHCP client service to function properly and get a DHCP address. Setting it to automatic may sometimes help in resolving the said issue.

Read Also:  PC Not Showing Wi-Fi Option: How to Fix It? (18 Methods)


Typing services

Selecting Properties

Clicking on the OK button

Note: This is not a guaranteed fix for all situations. So, if it does not work in your case, move on to the next solution.

Method 3: Configure the Network Adapter Settings

Sometimes, the issue may also be resolved when you configure the network adapter settings. Its default setting may require you to manually enter the DNS server and IP address. And, if it is not entered, the issue will occur.


Typing ncpa.cpl

Selecting Properties

Clicking on the Properties button

Clicking on the OK button

Do the same for Internet Protocol Version 6 (TCP/IPv6), marked by a red arrow in the image of the Wi-Fi Properties window before the above, if your network connection relies on this particular protocol.

Once you are done making the changes, restart your computer to check whether or not the issue is resolved. If it still persists, move to the next method.

Method 4: Set Network Properties to Automatic

Sometimes the network property may be set to manual and cause this issue. Changing the setting to automatic might fix the problem.


Clicking on Properties of your network

Clicking on the Edit button

Clicking on the Save button

Now, check whether the issue is resolved, or else move to the next solution.

Method 5: Reset the Network Settings

In some specific situations resetting network settings may potentially resolve the issue, especially if there is any misconfiguration or corruption in the settings. So, it is worth trying.


In the Command Prompt window, type the following commands one by one pressing Enter every time, after a command is successfully executed:

Read Also:  5 Ways to Fix Corrupted External Hard Drive

When it is done, you must close the Command Prompt window and restart the computer.

Method 6: Check Windows Firewall and Create an Exception

In a few specific situations, this specific solution may help. First check whether the Windows Firewall is causing issues with DHCP functioning by blocking the DHCP Client by disabling it. Then, create an exception if it is to resolve the issue.


Going to System and Security

Selecting Windows Defender Firewall

Clicking on Turn Windows Defender Firewall on or off

Customize Settings window

Now restart your system. After it restarts, check whether the issue is resolved or not. If there are no connectivity issues, then the Windows Defender Firewall was the culprit.

So, you will need to configure Firewall so that it allows the DHCP protocol. You can do this by creating an exception for it in the following way:

Going to the Find a setting

Selecting the Allow an App through Windows Firewall

Alternatively, depending on the operating system version, if this option is not available, you may select Windows Defender Firewall from the search results, go to the left pane and click on Allow an App or Feature through Windows Firewall.

Allowed Apps window

This will allow the DHCP client to communicate through the firewall and your issue will be resolved.

Method 7: Disable Proxy

Disabling proxy is reported to be effective in resolving the issues in some cases. So, you may try it as well.


Clicking on LAN settings

Local Area Network

Now, restart your PC and check whether the issue is resolved.


To wrap up, enjoying uninterrupted data flow and a seamless connectivity is not an issue anymore even if you encounter error messages such as DHCP is not enabled for Wi-Fi.

Now that you know the steps to enable DHCP for your Wi-Fi, it will be just a matter of a few minutes to get things back to normal.