PC Not Showing in Network: 12 Easy Ways to Fix It

By Dominic Cooper on February 28, 2023

When you add another computer system to a network, sometimes it may not show up in the workgroup or when you browse Network in the File Explorer. This is mainly an issue related to the configuration of the whole network.

However, there is nothing to worry, because you are at the right place to know some easy fixes to it.

KEY TAKEAWAYS

Why is the PC Not Showing in the Network?

The main reason behind a computer being invisible in a network is wrong configuration of the whole network in the first place.

However, there are a number of other reasons for a PC not to show up in a network. Some of them are as follows:

Most of these factors causing the issue will be removed in a few simple steps, as explained hereunder.

Fix PC Not Showing in Network

How to Fix PC Not Showing in Network?

In order to make your computer visible in a network, there are lots of easy solutions to avail, right from simply restarting your computer to turning on the Network Discovery, and from reinstalling the network adapter to enabling the SMB protocol.

As you continue reading, you will come to know which solution will work in your case. Ideally, it will largely depend on the specific cause of the issue. However, here are all of the possible fixes to the PC not showing up in a network issue.

Method 1: Tweaking Network Discovery

Often, a PC may not show a network because it cannot be discovered by the system in the first place. In such a situation, making changes in the Network and Sharing Center may resolve the issue.

This is one important method that involves different steps in different parts.

STEPS TO FIX:

Go to the Control Panel app

Network and Sharing Center option.

Read Also:  Why is Your CPU Underperforming? (16 Reasons & Fixes)

Advanced sharing settings

Turn on network discovery

Turn on automatic setup of network connected devices

Turn on sharing so anyone with network access can read and write the file in the Public folders

Method 2: Tweaking Services

A few specific services may not be set properly, such as the discovery of the provider host, which may prevent the computer from detecting the network.

Therefore, making some changes in the settings will fix the problem. Remember, this method also involves different tweaks, which you need to make in different service areas.

STEPS TO FIX:

App services

The next steps to follow are:

Function Discovery Provider Host

 Click Function Discovery Start

However, on the next restart, you may face the same problem again. In that case, you should follow these steps:

Function Discovery Provider Host Properties

You should follow the same process under the Services category for a few other things, such as:

Regardless of how long the process takes, it will undoubtedly resolve the problem. However, all these should be done on every computer connected to the network. Missing out on any one may make your PC invisible.

Method 3: Tweaking SMB 1.0

If the above solutions do not fix the issue, there may be issues with the SMB. This is located in Programs and Features in the Control Panel of your computer.

Therefore, checking it and making the necessary adjustments is a good way to resolve the issue.

STEPS TO FIX:

Tweaking SMB 1.0

Method 4: Turning on File Sharing

There may also be some issues in the file sharing ability of the computer system due to improper settings in network connection.

So, make the changes in the network status to enable the PC to detect the network.

STEPS TO FIX:

It should be set to private by default and has to be on every device.

Turning on file sharing

There are a few other simple fixes to the issue as well, apart from the other major and essential ones.

Method 5: Reset Network from Command Prompt

The network protocols play a significant role in the process, and therefore, in Windows, resetting all network protocols to their default settings may also fix the issue. You will need to use the Command Prompt for that.

STEPS TO FIX:

Reset Network from Command Prompt

Once the prompt opens, you must type each of the following commands and press the Enter key every time:

Finally, exit from the Command Prompt and check whether the issue is resolved.

Alternatively, you can reset the network from the Network reset window to fix the issue. This will find the default network settings and reinstall the network adapters as well.

To launch the network reset, follow these steps:

Network reset

Click on the Reset now

Once done, you must reboot the computer system.

Method 6: Using the Workgroup Wizard

In order to add your computer to a workgroup in a business network, the system may not detect the network if it is not linked properly.

Using the workgroup wizard to establish a proper connection is therefore, elementary.

STEPS TO FIX:

Using the workgroup wizard

Workgroup

name of the workgroup

workgroup ok

Restart the computer system to finish the process.

Method 7: Reinstalling Network Adapter from the Device Manager

The network adapter is often a cause of this issue. Resetting the network adapter card will revert the system back to its default settings.

However, in order to go ahead with this method, you will need to reinstall the network adapter.

STEPS TO FIX:

Reinstalling network adapter from the Device Manager

Finally, restart the computer system.

Method 8: Restart the PC

Sometimes, simply restarting the PC may resolve this issue because it will remove the apps that are causing temporary problems like not showing up in a network.

STEPS TO FIX:

Restart the PC

Method 9: Updating Windows

Sometimes bugs in the operating system may also cause several issues such as the PC not showing up in the network. Fresh updates will detect, fix and remove the bugs or issues that were in the earlier version.

Therefore, check for updates on a regular basis and run them.

STEPS TO FIX:

(Alternatively, you can press the Windows and I keys together on your keyboard)

Updating Windows

Click on Windows Update on the left panel

If updates are available, there will be a link. Click on it to download and install the latest updates and restart the PC.

Read Also:  Wi-Fi Router Overheating: How to Fix This Problem?

Method 10: Use the IP Address

Sometimes, you may not get access to a specific network if your PC is not detected by its unique IP Address. Therefore, make sure that you have entered the right IP address of your system.

STEPS TO FIX:

First, you will need to make sure that you know the exact IP address of your system. If you do not know the IP Address of your computer, use the Command Prompt and enter the command – ipconfig/all. Your system address will be either the IPv4 or the IPv6 address.

Now, go to the File Explorer and type the IP Address in the address bar after two backward slashes. For example: \\192.165.1.13

You will now be able to see your PC on the network.

This, however, is just a temporary fix that will allow you to get the job in hand done and then look for the other permanent fixes.

Method 11: Local Network Configuration Tweaks

The local network configuration may be proper, which, in some cases, may prevent the PC from detecting the network. So, reset it to fix the issue.

You may use the ping command in PowerShell to check whether or not this setting is in the right order.

STEPS TO FIX:

The initial steps to follow for it are opening the PowerShell terminal and using the ping command with the host name, say ping www.google.com, or the IP Address, say ping 192.165.1.13.

If it responds to the command, consider the configuration to be correct. If not, then something is wrong. In that case, follow the below steps:

Local network configuration tweaks

wifi property

Internet Protocol Version 4 property

Obtain an IP address automatically

Method 12: Use Network Adapter Troubleshooter

Once again, the network adapter may cause this issue due to improper settings even after apprising the drivers. Therefore, setting it right is required.

You may use the Windows troubleshooter to fix it for you.

STEPS TO FIX:

Use Network Adapter Troubleshooter

Look for the Network Adapter

Wait until the changes are applied and check whether or not your PC is now detected in the network.

Conclusion

So, coming to the end of this article, you now do not have to wonder why your PC is not showing up in the network, because you know the reasons as well as the easy fixes to the network discovery issue.

If simple fixes like restarting and troubleshooting do not help, there are lots of others to fall back and count on.