5 Ways to Fix SMART Hard Disk Error 301

By Dominic Chooper on July 23, 2023

Self-Monitoring Analysis and Reporting Technology or SMART hard disk error 301 is something users do not expect to encounter.

However, at times you may experience this unique error when you turn your PC on, which indicates the failure of the Hard Disk Drive or the Solid-State Drive installed on your PC.

There are some fixes to this specific issue before you go for the inevitable – replacing your hard drive. Continue reading this article to learn all about those solutions.


What are the Reasons for a SMART Hard Disk Error 301 in Windows?

Hard disk error 301 usually occurs when there is a severe corruption in the drive, HDD or SSD, or the device encounters physical damage.

In addition, there are some other significant reasons for this error to happen. These are:

Typically, the SMART hard disk error 301 indicates your hard drive is pretty bad and almost unusable.

How to Fix SMART Hard Disk Error 301?

In most cases, you will need to replace your hard drive with a new one if you get the SMART hard disk error 301.

Read Also:  7 Ways to Fix Media Disconnected Error in Windows

However, in some instances you can resolve the issue by simply restarting your PC, by performing a hard boot, or by running the CHKDSK command in the Command prompt.

Sometimes, if the ventilation and airflow is insufficient in your system, the hard drive will overheat and cause this issue. To resolve it, make sure the vents are clean and the coolants are working properly.

Also, clean all other internal parts of your PC regularly. This will prevent heat being absorbed by the dust and dirt accumulated in it. It will raise the temperature of the hard drive and cause such issues.

As for the advanced solutions for SMART hard disk error 301, you can try changing the boot priority order from the BIOS settings.

Apart from that, you may also check the hard disk drive for existing errors from its Properties as well as from BIOS and repair your computer from the boot menu by using the Command Prompt.

Method 1: Perform a Hard Reboot

Rebooting the system resolves a lot of issues and helps in dealing with bugs and errors. Therefore, in this case performing a hard reboot should be your first quick and easy solution to try and fix the SMART hard disk error 301.


Disconnecting the power cord

Press and holding the power button

Method 2: Run the Check Disk command in the Command Prompt

If the above method failed to restore normalcy, you should try fixing the issue by running the Check Disk command in the Command Prompt.

This will help in resolving any issues in the directory that is causing such error. It may also remove the bad sectors on the drive causing the same issue.


Command chkdsk C: /f/r/x

Once the command is executed fully, type exit to close the Command Prompt. Now restart your computer and check whether the issue is resolved or not.

Read Also:  PC Not Able to Reset: 8 Ways to Fix This Problem

Method 3: Change the Boot Priority Order from BIOS

Changing the order of booting can also resolve the SMART hard disk error 301. You can do it from BIOS or the Basic Input Output System settings.


(Usually, the F1, F2, F10, F12, Del, or Esc keys are the common BIOS keys. It can be different for different PC models. Refer to the manual to know the specific key).

It will open the BIOS screen.

Advanced BIOS Feature tab

First Boot Device [USB-HDD]

Hard Disk Boot Priority tab

Samsung SSD 860 EVO25

The issue should be resolved now.

Method 4: Repair Your PC from Boot Menu Using the Command Prompt

You can also use the boot menu to run a command and repair your computer, which may fix the problem in the process.


Going to the Boot menu

Windows setup

Selecting Repair your computer at the bottom of the Windows setup screen

Selecting Troubleshoot

Selecting Command Prompt

Typing in chkdsk C:

Typing in sfc /scannow

This will start the system scan and take some time.

Clicking on Continue to start using Windows

This will resolve the SMART hard disk error 301.

Method 5: Check the Hard Disk and Fix Errors

And finally, like in most issues, you can check the hard disk for any existing errors that may be causing this issue and fix them to rectify the SMART hard disk error 301.


Local Disk

After the process is complete, if the hard drive has any errors, the system will ask you to check the disk.

On the other hand, if there are no errors found, you will see the following Error Checking (Local Disk (C:)) window saying that You don’t need to scan this drive:

Error Checking

However, there is no harm if you still scan the hard drive. In that case, click on the Scan drive option, shown in the above image.

It will take some time and when this scanning process is complete, you will need to reboot the computer system in order to fix the errors in it, if any. If there aren’t any errors, you can close the window.

Finally, restart your computer. After it restarts go to the File Explorer to find out whether or not the SMART hard disk error 301 has been resolved.

Alternatively, besides the Windows utility, you can also check the hard drive from the BIOS and fix the error.

This will start checking the hard disk for errors. If there are any errors found, it will fix them as well. This will eventually fix the SMART hard disk error 301.


The hard drive in your PC is its heart and if it fails it will affect the entire workflow.

The SMART hard drive error 301 will let you know that the drive is not working properly.

But you do not have to worry because now you know the way to resolve the issue effectively.