Wi-Fi Repeater Not Working: How to Fix This Problem?

By Dominic Chooper on September 11, 2023

In this increasingly connected world, you must have a reliable Wi-Fi connection for work or for leisure alike.

However, if the Wi-Fi repeater stops working, it will disrupt your internet connection and leave you frustrated.

In this article, you will learn about the common causes of this issue and a few practical solutions to fix it and make your repeater run smoothly and have a seamless wireless connection in your office or at home.

KEY TAKEAWAYS

Why is the Wi-Fi Repeater Not Working?

There can be some incorrect settings or some hardware issues in the Wi-Fi repeater which may hinder it from functioning properly.

In addition, a few other causes for this issue are:

The solutions to this issue are pretty simple.

Read Also:  How to Fix PC Not Connecting to Hotspot? (10 Methods)

Ways to Fix Wi-Fi Repeater Not Working

The issue of the Wi-Fi repeater not working can be addressed with some basic checks, such as ensuring a proper connection and matching the SSID of the router and repeater.

You may also make some changes in the settings, such as restoring the factory settings of the repeater.

A few basic fixes to try:

There are some other simple fixes you may try.

Forget and connect again: Press the Windows + I key together > Select Network & Internet > Wi-Fi > Manage known networks > Your Wi-Fi repeater > Forget > Wi-Fi icon in the taskbar > Connect again.

Power cycle router, repeater, and PC: Turn each of these devices off > Unplug from the wall socket > Wait for some time > Plug them back > Turn them on.

If these solutions did not resolve the issue of the Wi-Fi repeater not working, try the following fixes.

Method 1: Reset the Device to Factory Settings

One of the easiest ways to fix a Wi-Fi repeater that is not working is to press the reset button. This will reset it back to factory settings.

STEPS TO FOLLOW:

Hole marked Reset

Do the same if your device comes with a separate Reset button.

Now, check your Wi-Fi list and you will find that the factory default extender or repeater network name is displayed in the list.

Method 2: Remove the Faulty Component

If there is no power in the repeater in the first place, there must be some faulty component causing the issue, usually a faulty capacitor or the power connector. Replace whichever is at fault to make the device work again.

Read Also:  How to Reset Administrator Password on Windows?

Note: If you do not have the right tools and expertise, skip this step. Take it to a professional for repair instead.

The design and layout of components may differ depending on the model of the repeater.

STEPS TO FOLLOW:

Removing the enclosure

Checking the Network Board

Unscrewing the Power Board

Looking for faulty components

Checking the power supply

Chop off the connector

Fix the power connector of the repeater

Connect it to the network board

Remove the old power board

Refix the network board

Plug the repeater in

Method 3: Enable the Repeater

Sometimes, the repeater may be disabled. You will need to enable it first in order to make it work after disabling the Wi-Fi connection.

Read Also:  What is Screen Flickering & How to Fix? (5 Methods)

STEPS TO FOLLOW:

Type ncpa.cpl

Network Connections window

Login using your Username and Password

Going to Basic settings

Clicking on the Apply button

WiFi-Repeater Enabled

It will be detected and working now.

Conclusion

In conclusion, fixing Wi-Fi repeater issues is vital for a reliable internet connection.

Effective solutions include relocating the repeater, performing a factory reset, adjusting frequency and channel settings, and updating firmware.

These straightforward fixes will restore normal operation and enhance your overall user experience.