How to Set Up Wi-Fi Bridge Mode?

By Dominic Chooper on September 15, 2023

Wi-Fi Bridge Mode involves configuring two devices, with one acting as a bridge between separate networks.

This setup enhances the coverage of your network, especially in areas with weaker signal strength.

This comprehensive guide will lead you through the simple process; providing crucial insights into its significance.


What is Wi-Fi Bridge Mode and Why Do You Need It?

Wi-Fi Bridge Mode is a specific configuration where two devices are connected, with one acting as a bridge between separate networks.

A Bridge Mode can serve various purposes, such as:

Network extension: You can expand Wi-Fi coverage to improve connectivity in areas with weak signal strength.

Simplified networking: It streamlines the process of connecting multiple access points or routers, creating an integrated network.

Seamless roaming: It will ensure uninterrupted connectivity as devices move between access points.

Enhanced security and performance: You can isolate specific networks or devices to enhance security and overall network performance.

Compatibility: It facilitates the compatibility of different devices and router types on the network, enabling them to work harmoniously together.

Ways to Set Up Wi-Fi Bridge Mode

To set up a Wi-Fi Bridge Mode you will have to access the router interface through a web browser for the necessary configurations.

Read Also:  How to Forget or Remove Wi-Fi Network?

Additionally, you will have to follow these steps:

Here are the steps explained to you in detail.

Method: Find the Details of the First and Configure the Second Router

To create the Bridge Mode, you will need to configure the second router based on the details of the first.

Note: In this demonstration, a TP-Link router is bridged with a Linksys router, both supporting Bridge Mode. You can also use two routers of the same brand.

Layouts and interfaces may vary from one router model to another but the fundamental process is the same. So, refer to your router manual.


ClickIing on Run as administrator

Typing in the command ipconfig

Typing in the Username and Password

Going to DHCP

Checking the Wireless Network Name

Wireless Password

Close all windows and disconnect the TP-Link router from the computer.

Now you will have to set up the Linksys router to create a Bridge Mode.

Typing the ipconfig command

Clicking on the Continue with an open and unsecured network

Clicking on the Continue button

Typing in the Username and Password

Clicking on the Save Settings button

Clicking on Continue

Wireless Security tab

Now, you will have to assign a new IP address to the Linksys router.

Read Also:  How to Find Network Security Key?

Network Setup

Clicking on the Continue button

Now, you need to connect the two routers properly.

LAN port of the first router

LAN port of the second router

Now the bridge is set up successfully with both having the same SSID and password, as shown in the image below:

Bridge is set up successfully

The second router will not function like a router anymore but act as a bridge to the first router, which is now in charge of both of them.

Clicking on the Next Button

(The devices can be connected wirelessly or by using Ethernet cables to the LAN ports on the router).


To sum up: setting up Wi-Fi Bridge Mode is a useful way to extend the range of the network and improve connectivity.

When you follow the steps mentioned above, you can successfully configure and use Bridge Mode for seamless networking without pointless complications.